CRUX RVCVW-73L Brugsanvisning
Her er CRUX RVCVW-73L (Bakkamera) brugervejledning. 2 sider på sprog med en vægt på 535,470.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
- Codes the factory radio to turn on the reverse camera function.
- OEM type license plate light camera with white LED included.
- Includes camera power down circuit to extend the life of the camera.
- MFD3 or RNS-315 Navigation Radios.
In the event this unit is to be returned for any reason, the customer must “decode”
the radio before doing so to receive a replacement or refund. See instructions on
page 2 on how to decode the radio.
RVCVW-73L
MODULE
RVCVW-73L
HARNESS
OBD II ENCODER
CVW- L 07
CAMERA
POWER DOWN
CIRCUIT
The parking lines are there to assist you while reversing. To activate the parking lines simply
cut/disconnect the WHITE loop wire located near the 4-pin camera connector.
What the Lines mean:
Green Line: CLEAR
Yellow Line: GETTING CLOSE
Red Line: WARNING - VERY CLOSE
rev.020521
1 / 2
GREEN
YELLOW
RED
Problemløsning CRUX RVCVW-73L
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | CRUX |
| Kategori: | Bakkamera |
| Model: | RVCVW-73L |