CRUX
Ikke kategoriseret
VRFBM-77C
CRUX VRFBM-77C Brugsanvisning
Her er CRUX VRFBM-77C (Ikke kategoriseret) brugervejledning. 12 sider på sprog Engelsk med en vægt på 5,646,390.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/12
• With OE type Dynamic Parking Guide Lines
• On-screen display and setup
• 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,
rear-view camera, reverse gear)
• Rear-view camera input
• Front camera input
• Front camera input can also be used as an Auxiliary Video Input
• Automatic switching to rear-view camera input on engagement of reverse gear from all
operation modes
• Forced rear-view camera option (only on vehicles with PDC button)
• Manual return from rear-view and front camera (cancellation of automatic switching)
• Picture-in-picture mode combining after-market rear-view and front camera picture(s)
with factory parking sensor graphics
• Compatible with all factory video accessories (e.g. rear-view camera, DVD-changer, etc.)
• Plug & Play installation
• For the F-series BMW with navigation system or radio and 6.5”, 7”, 8.8” or 10.25”
monitor with 4+2pin HSD2 LVDS connector
• On i3 installations, part# HAR-i3 is required to install the interface. The interface module
is installed/mounted under the rear seat and you will need to run the HAR-i3 towards
the rear seat.
BM-77C Module
BM-77C Harness
4+2 PIN HSD2 LVDS Cable
Power/CAN Harness
1 / 12
rev.122617
Problemløsning CRUX VRFBM-77C
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | CRUX |
| Kategori: | Ikke kategoriseret |
| Model: | VRFBM-77C |