Axxess
Ikke kategoriseret
AXTC-BM1
Axxess AXTC-BM1 Brugsanvisning
Her er Axxess AXTC-BM1 (Ikke kategoriseret) brugervejledning. 4 sider på sprog med en vægt på 666,660.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/4
AXTC-BM1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 3/8/23 INSTAXTC-BM1
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
Programming .........................................................3
Troubleshooting .....................................................4
BMW / Mini SWC (Steering Wheel Control)
and Data Interface 2006-2012
APPLICATIONS
• Provides accessory power (10-amp)
•
Provides illumination, parking brake,
reverse, and speed sense outputs
• Retains warning chimes through
an onboard speaker
• Retains audio controls on the
steering wheel
• Designed to be compatible with all
major radio brands
• Auto detects vehicle type, radio
connection, and preset controls
• Ability to dual assign steering
wheel control buttons
• Retains memory settings even
after battery disconnection or
interface removal (non volatile
memory)
• Designed for non-amplified
models, or when bypassing a
factory amplifier
• Retains balance and fade
• Micro-B USB updatable
BMW
1 Series .....................2008-2013
3 Series (1) ...............2012-2013
3 Series......................2007-2011
3 Series (2) .......................2006
M3 ..............................2007-2013
Mini (Cooper)
Clubman (R55) ........2008-2014
Convertible (R57) ....2009-2015
Countryman (3) ....... 2011-2016
Coupe (R58) ..............2012-2015
Hatchback (R56) ......2007-2013
Paceman (3) ............ 2011-2016
Roadster (R59) .........2012-2015
• AXTC-BM1 interface
• AXTC-BM1 harness
• 3.5mm adapter
(1) Excluding sedan models (2) Sedan and Wagon only (3) Without factory NAV
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
Problemløsning Axxess AXTC-BM1
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Axxess |
| Kategori: | Ikke kategoriseret |
| Model: | AXTC-BM1 |