Axxess
Ikke kategoriseret
AXDI-CL2
Axxess AXDI-CL2 Brugsanvisning
Her er Axxess AXDI-CL2 (Ikke kategoriseret) brugervejledning. 4 sider på sprog med en vægt på 494,841.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/4
AXDI-CL2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/21/20 INSTAXDI-CL2
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
GM Data Interface 2000-2013
APPLICATIONS
See inside front cover
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
•
Provides illumination, parking brake, reverse, and speed sense outputs
• Retains chimes through an onboard speaker
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for non-amplified models, analog amplified models,
or when bypassing a factory amplifier
• Retains balance and fade
• Micro-B USB updatable
• AXDI-CL2 interface
• AXDI-CL2 harness
Problemløsning Axxess AXDI-CL2
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Axxess |
| Kategori: | Ikke kategoriseret |
| Model: | AXDI-CL2 |