StarTech.com
Ikke kategoriseret
PEX8S1050
StarTech.com PEX8S1050 Brugsanvisning
Her er StarTech.com PEX8S1050 (Ikke kategoriseret) brugervejledning. 2 sider på sprog Engelsk med en vægt på 0.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 24, 2023 5:11 PM
Product Diagram (PEX8S1050)
Component Function
1DB62 Connector • Connects the 8-Port DB62 to DB9MX8
Breakout Cable Serial Adapter Card to the .
2PCI Express Connector • Used to connect the to Serial Adapter Card
the on the .PCI Express Slot Host Computer
3JP1 PME Jumper
• Used to enable or disable wake from sleep.
• ENA = Enables wake from sleep. Move the plug
to cover the and middle pins.ENA
• DIS = Disables wake from sleep. Move the plug
to cover the and middle pins.DIS
4J5 Aux Power
Connector
• Used to connect the Host Computers Power
Supply (4 Pin SP4/Floppy power connector).
5JP5 Aux Power Source
Selector
• Determines the voltage.DC Power Source
• X5V DC Power Source= 5V from a connected
to the .JP5 Aux Power Connector
• X12V DC Power Source = 12V from a
connected to the .JP5 Aux Power Connector
• I12V PCI Express Slot = 12V from
(motherboard’s PCIe slot).
6JP4 Power Over
External Connector
• Enables or disables the power over Pin #58
on the 8-Port DB62 to DB9MX8 Breakout
Cable’s DB62 Connector.
• GND Pin #58 = No power is supplied to on the
DB62 Connector.
• PWR Pin #58 = Power is supplied to on the
DB62 Connector DC Power Source when a is
connected to . J5 Aux Power Connector
8 Port PCI Express RS232 Serial Adapter Card 16C1050
Requirements
For the latest requirements, please visit www.startech.com/PEX8S1050
• Computer with an available PCI Express® slot (x1, x4, x8, or x16)
• (Optional) External DC Power Source - Host Computer’s PSU
• (Optional) DB62 to DB9MX8 Cable w/ Pin #58 as power source
Operating System (OS):
• Windows® 7, 8, 8.1, 10 and 11
Tools
• Small Phillips Head Screwdriver
Driver
• You must download and install the Systembase Drivers, see Downloading the
Drivers section.
Hardware Installation
Warning: Serial Adapter Cards can be damaged by static electricity. Make sure that you are
properly grounded before you open your computer case or touch the . Serial Adapter Card
Only handle the by its edges and do not touch the gold connectors.Serial Adapter Card
Installing the Serial Adapter Card
1. Turn o the and any that are connected (e.g., Computer Peripheral Devices
printers, external hard drives, etc.).
2. Unplug the from the back of the and disconnect any Power Cable Computer
Peripheral Devices that are connected.
3. Remove the from the . Cover Computer Case
4. Locate an open (x1, x4, x8, or x16) and remove the corresponding PCI Express Slot
Metal Cover Plate Computer Case from the back of the .
5. Gently insert the into the open and fasten the Serial Adapter Card PCI Express Slot
Bracket Computer Case to the back of the .
6. Place the back onto the . Cover Computer Case
7. Connect the 8-Port DB62 to DB9MX8 Breakout Cable ( ) DB62 included to the
Connector Serial Adapter Card.on the
Note: The the 8-Port DB62 to DB9MX8 Cable’s Connector shell/exterior is not
grounded.
8. Tighten the two screws on the sides of the , securing the . DB62 Connector Cable
9. Connect up to 8 serial devices to the on the DB9MX8 Connectors DB62 to DB9MX8
Breakout Cable.
12
65
4
3
Problemløsning StarTech.com PEX8S1050
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 16 mm |
| Dybde: | 105 mm |
| Højde: | 120 mm |
| Vægt: | 74 g |
| Produktfarve: | Gul |
| Pakkevægt: | 672 g |
| Pakkedybde: | 290 mm |
| Pakkebredde: | 190 mm |
| Pakkehøjde: | 65 mm |
| Opbevaringstemperatur (T-T): | -40 - 75 °C |
| Relativ luftfugtighed ved drift (H-H): | 5 - 95 % |
| Driftstemperatur (T-T): | 0 - 55 °C |
| Hurtig installationsvejledning: | Ja |
| Kabler inkluderet: | Seriel |
| Harmoniseret systemkode (HS): | 84733020 |
| Bæredygtighedscertifikater: | RoHS |
| Understøttede Linux-operativsystemer: | Ja |
| Hovedkassen højde (udvendigt): | 315 mm |
| Hovedkassens længde (udvendigt): | 510 mm |
| Hovedkassens bredde (udvendigt): | 400 mm |
| Værtsgrænseflade: | PCIe |
| Intern: | Ja |
| Produkter pr. hovedkasse (udvendigt): | 14 stk |
| Gennemsnitstid mellem fejl (MTBF): | 160013 t |
| Understøttede operativsystemer til servere: | Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2016, Windows Server 2019 |
| Seriel grænsefladetype: | RS-232 |
| Overholdelse af branchestandarder: | 16C1050 UART |
| Antal serielle porte: | 8 |
| Baud hastighed: | 921.6 Kbit/s |
| Data-bits: | 5, 6,7, 8 |
| Stop bits: | 1, 1.5, 2 |
| Output-grænseflade: | Seriel |
| Maksimal kabellængde: | 0.5 m |
| Chipsæt: | ASMedia - ASM1083, System Base - SB16C1058PCI |
| FIFO (først ind, først ud): | 256 B |
| Flow Control type: | RTS/CTS, XON/XOFF |
| Paritetsbit: | Even, N,Odd |