StarTech.com
Ikke kategoriseret
CF2USAT18E
StarTech.com CF2USAT18E Brugsanvisning
Her er StarTech.com CF2USAT18E (Ikke kategoriseret) brugervejledning. 2 sider på sprog Engelsk med en vægt på 0.1 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/10/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• CF2USAT18E enclosure
• Mini Screwdrivers
• Installation Guide
System Requirement
• 3.3V Compact Flash card
CF2USAT18E
1.8in Micro SATA to Compact Flash Solid State Drive Adapter
*actual product may vary from photos
Installation
Hardware Installation
1. Remove the 4 small screws on the underside of the enclosure, and
remove the cover plate.
2. Remove the circuit board and insert the Compact Flash card into
the CF card slot.
3. Reinstall the circuit board into the enclosure.
4. Place the metal cover back on and replace the 4 screws.
Driver Installation
No drivers should need to be installed for this enclosure, as the
enclosure appears as a standard SATA hard drive.
Specications
Bus Interface SATA rev 2.x
Connectors Micro SATA connector (7+9 pin)
Power Consumption 5V / 150mA
CF Compatibility 3.3V CF type I and II (SLC/MLC)*
Problemløsning StarTech.com CF2USAT18E
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Vægt: | 35 g |
| Pakkevægt: | 280 g |
| Dimensioner (BxDxH): | 55 x 75 x 30 mm |
| Effektkrav: | 5V, 150mA |
| Grænseflade: | Compact Flash SSD |
| Størrelse på lagerdisk: | 1.8 " |
| Understøttede lagerdrev brugerflader: | SATA |