Metra Ikke kategoriseret AXDSPX-ETH1

Metra AXDSPX-ETH1 Brugsanvisning

Her er Metra AXDSPX-ETH1 (Ikke kategoriseret) brugervejledning. 4 sider på sprog med en vægt på 756,274.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.

Side 1/4

AXDSPX-ETH1

INSTALLATION INSTRUCTIONS

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product. Ensure

that all installation connections, especially the

air bag indicator lights, are plugged in before

reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included

with the aftermarket radio.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Troubleshooting .....................................................4

GENERAL MOTORS 2019-UP

ETHERNET DSPX PACKAGE

• Designed for GM Ethernet ampliﬁers

• Ethernet data interface w/AXDSP-X (digital signal processor) built-in

• Includes an ampliﬁer bypass harness

• Retains factory chimes including parking sensor chimes

• Retains vehicle’s voice prompts

• Chimes and voice prompts go through the aftermarket ampliﬁer and/

or cluster

• Selectable 31 Band graphic EQ or 5 Band Parametric EQ

• 10 individually assignable outputs

• AXDSPX-ETH1 interface

• AXDSPX-ETH1 harness

• LD-DSP-ETH1

• LD-DSP-ETH2

• AXBK-1

• AXDSPX-ETH1 interface harness

(male connectors: 8-pin, 16-pin)

• Ampliﬁer bypass harness

(female connectors: 8-pin black

and 20-pin green )

For Dash Disassembly Instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the Vehicle Fit Guide for Radio Install kits.

Visit

axxessinterfaces.com

for current application list.

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass ﬁlters

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

•

Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app