Metra
Bilmonteringssæt
95-8907HD
Metra 95-8907HD Brugsanvisning
Her er Metra 95-8907HD (Bilmonteringssæt) brugervejledning. 8 sider på sprog med en vægt på 889,557.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/8
METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 11/3/2015 INST95-8907HG
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-8907HG
• ISO DDIN radio provision
• Painted two-tone silver and gloss black
• A) Radio trim panel • B) Radio brackets • C) (2) Metal speed clips • D) (2) #10 x 3/4” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 Antenna Adapter: • 40-LX11
• Panel removal tool • Phillips screwdriver
• 10 mm socket wrench and long extension
TOOLS REQUIRED
Subaru Impreza and Crosstrek 2015-up
95-8907HG
A
C
D
B
Dash Disassembly ..............................................2-5
Kit Assembly
– ISO DDIN radio provision ...................................... 6
Table of Contents
Problemløsning Metra 95-8907HD
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Metra |
| Kategori: | Bilmonteringssæt |
| Model: | 95-8907HD |