Ctek
Batterioplader
XS 0.8
Ctek XS 0.8 Brugsanvisning
Her er Ctek XS 0.8 (Batterioplader) brugervejledning. 5 sider på sprog Engelsk med en vægt på 0.9 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/5
EN
EN • 3
ERROR LAMP
FULLY CH GEDARREADY TO USE
POWER LAMP
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Follow the 6-step display through the charging process.
The the engine battery is ready to start 3 when STEP is lit.
The when battery is fully charged 5 STEP is lit.
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
C GON RATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M6
12V/0.8A
XS 0.8
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
*Supply plugs may differ to suit your wall socket.
MANUAL
20014896E XS 0.8, Manual EU, Print le 003.indd 3 2011-10-10 16:25:43
Problemløsning Ctek XS 0.8
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 55 mm |
| Dybde: | 145 mm |
| Højde: | 38 mm |
| Vægt: | 400 g |
| Produktfarve: | Sort, sølv |
| Batterispænding: | 12 V |
| Driftstemperatur (T-T): | -20 - 50 °C |
| Indgangsspænding: | 220-240 V |
| Indgangsfrekvens: | 50/60 Hz |
| Kabelfarve: | Sort |
| Aktuel opladning: | 0.8 |