CTA Digital
Ikke kategoriseret
ADD-GYM
CTA Digital ADD-GYM Brugsanvisning
Her er CTA Digital ADD-GYM (Ikke kategoriseret) brugervejledning. 1 sider på sprog med en vægt på 275,623.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/1
ADD-GYM
Instructions:
1.A the Cup Holder to the Towel Rackttaching
SUPPORT@CTADIGITAL.COM
Cup Holder and Towel Rack Gym Buddy
Add-On for CTA Digital Floor Stands
To adjust position on the pole, loosen nuts with Allen key, move to
desired orientation then tighten nuts again.
Maximum Weight Loading:10 lbs/5.0 kgs
Package Contents:
2. Cup Holder and Towel Rack to the PoleAttaching
1. cup holder arms with base plate holes. Pass screw through holes and screw nut on underside. Align
Repeat for all screws.
2. Align cup holder hole with towel rack hole, then pass screw through washer, cup holder, second washer.
Screw onto towel rack
1.
2.
3.
Align towel rack holes with grip holder holes on opposite sides of pole,
below height-adjust ring. Pass screws through holes, then tighten at
other end with nuts. Use Allen key while holding nut to tighten further.
Problemløsning CTA Digital ADD-GYM
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 381 mm |
| Dybde: | 120 mm |
| Højde: | 127 mm |
| Vægt: | 390 g |
| Produktfarve: | Sort |
| Monteringstype: | Klip |
| Antal understøttede kopper: | 1 |