CRUX
Ikke kategoriseret
VRFBM-77D
CRUX VRFBM-77D Brugsanvisning
Her er CRUX VRFBM-77D (Ikke kategoriseret) brugervejledning. 10 sider på sprog med en vægt på 4,554,814.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/10
BMW
1 SERIES
2007 2011 - 1 Series 3-door hatchback
2007 2013 - 1 Series 2-door coupe (1M)
2004 2012 - 1 Series (5-door)
2008 - 1 Series Convertible Up
3 SERIES
2005 - 2011 3 Series Sedan
2005 - 2011 3 Series Wagon
2006 - 2013 3 Series Coupe
2007 - UP 3 Series Convertible
5 SERIES
2004 - 2010 5 Series Sedan
2004 2007 5 Series Wagon –
6 SERIES
2004 - 2010 6 Series Coupe
2004 - 2010 6 Series Convertible
X SERIES
2007 - 2013 X5 Sports Activity Vehicle
2008 2011- Sports Activity Coupe X6
• Plug and Play Installation
• Media Controller with controls by factory infotainment (iDrive)
• Rear-view camera input
• Front camera input
• Front camera input can also be used as an Auxiliary Video Input
• Manual switching to rear-view camera (only for vehicles with PDC button)
• Manual return from rear-view and front camera (cancellation of automatic switching)
• 2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera,
reverse gear)
• Picture- -picture mode combining aftermarket rear-view and front camera picture(s) with factory in
parking sensor graphics
• Compatible with all factory video accessories (e.g. rear-view camera, Top-View Camera System)
• E-series with Navigation System or radio with 6.5 8.8 and 10-PIN LVDS Connector“ or “ monitor
• NOT compatible with Alpine made factory screen.
1 / 10
Rev.42121
Interface Box
BM-77D Harness
Power/CAN Harness
LVDS Cable 10
Problemløsning CRUX VRFBM-77D
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | CRUX |
| Kategori: | Ikke kategoriseret |
| Model: | VRFBM-77D |