Techno Line
Alarmen ringer
WT 759
Techno Line WT 759 Brugsanvisning
Her er Techno Line WT 759 (Alarmen ringer) brugervejledning. 1 sider på sprog med en vægt på 75,391.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/1
Manual WT 759
Setting in
Pull down the lid of the battery compartment (at the bottom of the case).
Insert a new battery (AA type, LR6, 1,5 V), observing correct polarity as indicated in the
battery compartment. Put lid back again.
Setting the clock automatically
The clock starts automatically receiving the DCF signal and displays after 2 - 5 minutes the
correct time. If the clock still has not set itself after 10 minutes, reception is faulty or not
possible at the chosen location. Interferences could be electronically devices like TV or PC.
The disturbance range can be a circuit of up to 2 meter. Press RESET button on the backside
and repeat setting at a different location.
Switch On alarm
Push the alarm ON/OFF button upwards. The alarm sounds at the set alarm time.
Interrupt alarm (snooze)
Press SNOOZE button on top of the alarm clock. The alarm is interrupted and the backlight is
activated. The alarm sounds again after 5 minutes.
Switch off alarm
To switch off the alarm, push the alarm ON/OFF – button down.
Backlight
To activate backlight, press SNOOZE button on top of the clock.
Problemløsning Techno Line WT 759
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Produktfarve: | Sølv |
| Skærmtype: | Analog |
| Husmateriale: | Plast |
| Dimensioner (BxDxH): | 80 x 56 x 115 mm |
| Batteritype: | LR06 Mignon AA |
| Antal understøttede batterier: | 1 |
| Snooze funktion: | Ja |