StarTech.com USB2LINK Brugsanvisning
Her er StarTech.com USB2LINK (Kabler til pc'er og periferiudstyr) brugervejledning. 2 sider på sprog med en vægt på 369,837.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/31/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/USB2link.
Packaging contents
• 1 x USB Data Transfer Cable
• 1 x Instruction Manual
• 1 x Driver CD
System requirements
• Available USB port on Source and Destination computers
• Windows® XP SP2 or SP3 (32/64-bit), Windows Vista® (32/64-bit),
Windows® 7 (32/64-bit), Windows 8 (32/64-bit)
• Supported transfer modes:
• Windows XP to Windows Vista
• Windows XP to Windows 7
• Windows XP to Windows 8
• Windows Vista to Windows Vista
• Windows Vista to Windows 7
• Windows Vista to Windows 8
• Windows 7 to Windows 7
• Windows 7 to Windows 8
• Windows 8 to Windows 8
Note: In Windows 8.1, Microsoft removed support for cables from
the Windows Easy Transfer software. As such, Windows 8.1 and later
doesn’t support the USB2Link cable.
USB2LINK
USB Easy Transfer Cable for Windows
Installation
Note: The Windows Easy Transfer software doesn’t support
transferring les from a 64-bit operating system to a 32-bit operating
system.
1. To transfer les from Windows XP (source) to Windows Vista
(destination), download the Windows Easy Transfer (WET)
software from the Microsoft website and install the software onto
the XP computer:
http://www.microsoft.com/downloads/details.
aspx?FamilyId=2B6F1631-973A-45C7-A4EC-
4928FA173266&displaylang=en.
To transfer les from Windows XP/ Windows Vista (source)
to Windows 7/ 8 (destination), rst run the Windows Easy
Transfer software on the Windows 7/ 8 computer and follow
the instructions to copy the software onto the older operating
system.
2. Once the proper version of Windows Easy Transfer is installed on
both computers, connect the USB Transfer cable between the two
computers.
*actual product may vary from photos
Specications
Host Interface USB 2.0
Connectors 2 x USB type A male
Supported Transfer
Modes
Windows XP to Windows Vista
Windows XP to Windows 7
Windows XP to Windows 8
Windows Vista to Windows Vista
Windows Vista to Windows 7
Windows Vista to Windows 8
Windows 7 to Windows 7
Windows 7 to Windows 8
Windows 8 to Windows 8
Cable Length 2 meters (6.6 ft)
Supported Operating
System
Windows XP SP2 or SP3 (32/64 bit),
Windows Vista (32/64 bit), Windows 7
(32/64 bit), Windows 8 (32/64 bit)
Note: Windows 8.1 doesn’t support the USB2Link cable.
3. Windows may automatically prompt you to run the Windows
Easy Transfer software. If not, then launch the software on both
computers and follow the instructions provided by the software.
4. PCLinq3 software is included in the CD and can be used to
transfer les between two Windows PCs. The location of the
software is: /USB2LINK/Prolic/PL25A1/PCLinq3.
Problemløsning StarTech.com USB2LINK
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Vægt: | 70 g |
| Antal pr. pakke: | 1 stk |
| Brugervejledning: | Ja |
| Produktfarve: | Sort |
| Pakkevægt: | 200 g |
| Pakkedybde: | 170 mm |
| Pakkebredde: | 140 mm |
| Pakkehøjde: | 30 mm |
| Kabellængde: | 2 m |
| USB version: | USB 2.0 |
| Bæredygtighedscertifikater: | RoHS |
| Kompatible operativsystemer: | Windows XP, Windows Vista, Windows 7, Windows 8 |
| Maksimal dataoverførselshastighed: | 480 Mbit/s |
| Stik 1: | USB A |
| Stik 2: | USB A |
| Stik 1 køn: | Hanstik |
| Stik 2 køn: | Hanstik |
| Stik køn: | Hanstik/Hanstik |
| Stik 1 formfaktor: | Lige |
| Stik 2 formfaktor: | Lige |
| Kabel kappemateriale: | Plast |