StarTech.com
netværkskort og adaptere
PEXUSB3S3GE
StarTech.com PEXUSB3S3GE Brugsanvisning
Her er StarTech.com PEXUSB3S3GE (netværkskort og adaptere) brugervejledning. 2 sider på sprog med en vægt på 543,030.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 01/30/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x 3 Port PCI Express USB 3.0 Card w/ Gigabit Ethernet
• 1x Low-Prole Bracket
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• PCI Express enabled computer with an available PCI Express p1-x1 slot
or higher (x4, x8, x16)
• SATA power connector (highly recommended, but optional)
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64),
Windows Server® 2012, 2008 R2, Linux 2.6.31 and up (Tested up to
3.5)
PEXUSB3S3GE
3 port PCI Express USB 3.0 card with Gigabit Ethernet - SATA power
Installation
Hardware Installation
WARNING!
PCI Express cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your PCI
Express card. StarTech.com recommends that you wear an anti-
static strap when installing any computer component. If an anti-
static strap is unavailable, discharge yourself of any static electricity
build-up by touching a large grounded metal surface (such as the
computer case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
1. Turn your computer o and any peripherals connected to the
computer (i.e. printers, external hard drives, etc.). Unplug the
power cable from the rear of the power supply on the back of the
computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. (See your computer
system documentation for details).
3. Locate an open PCI Express p1-x1 slot and remove the metal cover
plate on the rear of the computer case. (See your computer
system documentation for details).
Note: This card will work in PCI Express slots of additional lanes (i.e.
x4, x8, or x16 slots).
4. Gently insert the card into the open PCI Express slot and fasten
the bracket to the rear of the computer case.
Note: If installing the card into a small form-factor/low-prole
desktop system, replacing the pre-installed standard-prole bracket
with the included low-prole (half-height) installation bracket may
be necessary.
5. It is recommended you connect the optional SATA power using
an available SATA power connector from the computers power
supply.
Note: It is recommended that SATA power is connected to the card
to ensure sucient power is provided to each USB 3.0 port.
6. Place the cover back onto the computer case.
7. Insert the power cable into the socket on the power supply of the
computer, and reconnect all other connectors removed in Step 1.
Gigabit
RJ 45 Port
SATA
Power
PCI Express x1
USB 3.0 Ports
Type “A”
Female x 3
Problemløsning StarTech.com PEXUSB3S3GE
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 18 mm |
| Dybde: | 77 mm |
| Højde: | 120 mm |
| Vægt: | 60 g |
| Brugervejledning: | Ja |
| Produktfarve: | Metallic, Red |
| Pakkevægt: | 150 g |
| Pakkedybde: | 176 mm |
| Pakkebredde: | 144 mm |
| Pakkehøjde: | 33 mm |
| Opbevaringstemperatur (T-T): | -25 - 70 °C |
| Relativ luftfugtighed ved drift (H-H): | 20 - 80 % |
| Ethernet LAN-porte (RJ-45): | 1 |
| Ethernet LAN: | Ja |
| Driftstemperatur (T-T): | 5 - 50 °C |
| Ethernet LAN-datahastigheder: | 10,100,1000 Mbit/s |
| Forbindelsesteknologi: | Ledningsført |
| Certificering: | CE, FCC |
| Kabelteknologi: | 10/100/1000BaseT(X) |
| Netværksstandarder: | IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| LED-indikatorer: | Activity, Link |
| Harmoniseret systemkode (HS): | 85176990 |
| USB version: | 3.2 Gen 1 (3.1 Gen 1) |
| Bæredygtighedscertifikater: | RoHS |
| Understøttede Linux-operativsystemer: | Ja |
| Værtsgrænseflade: | PCI Express |
| Grænseflade: | Ethernet |
| Intern: | Ja |
| Maksimal dataoverførselshastighed: | 5000 Mbit/s |
| Drivere inkluderet: | Ja |
| Fuld duplex: | Ja |
| Gennemsnitstid mellem fejl (MTBF): | 1920042 t |
| Understøttede operativsystemer til servere: | Windows Server 2008 R2, Windows Server 2012 |
| Monteringsbeslag inkluderet: | Ja |
| Flowkontrol support: | Ja |
| Jumbo Frames support: | Ja |
| Jumbo rammer: | 9000 |
| USB-dataoverførselshastigheder: | 5000 Mbit/s |
| Auto-forhandling: | Ja |
| Auto MDIX IEEE: | Ja |
| Wake-on-LAN klar: | Ja |
| Understøtter UASP: | Ja |
| Antal USB 3.2 Gen 1 (3.1 Gen 1) Type-A hub porte: | 3 |
| PCI-kort formfaktor: | Fuld højde (lav profil) |
| VLAN mærkning: | Ja |
| Chipsæt: | Renesas / NEC - µPD720201, Realtek - RTL8153 |
| PCI version: | 2.0 |