StarTech.com
Flad panel støtte
MONSTADQI
StarTech.com MONSTADQI Brugsanvisning
Her er StarTech.com MONSTADQI (Flad panel støtte) brugervejledning. 2 sider på sprog med en vægt på 667,522.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 10, 2020
Product Diagram (MONSTADQI)
Component Function
1
Stand Top with
Integrated Qi Charger
• 23.6 x 9.8 inches (600 x 250 mm) surface area
• Holds a , a Monitor Mobile Device with
Wireless Charging Capabilities, and a
Notebook/Paper Documents
2Legs
• Adjustable height:
• Legs folded down - 3.3 inches (83.5 mm)
• Legs folded up - 4.5 inches (115.5 mm)
3Qi Charger
• 15W Charging for a Mobile Device with
Wireless Charging Capabilities
4Power Cable
• Connect the (included) to Power Adapter
provide power to the Qi Charger
Requirements
For the latest requirements and full manual, please visit:
www.startech.com/MONSTADQI.
• Mobile Device with Wireless Charging Capabilities x 1
• Clean, Flat, and Stable Surface
Installation
Assembling the Monitor Riser
1. Determine the desired height for the .Stand Top
Monitor Riser with Integrated Qi Charging Pad
2. (Optional -- Increase the height of the ) Rotate the Monitor Riser Legs Height
Adjustment Arms Legs Height found on the sides of the out and up. The
Adjustment Arms Legs Height pivot from a single point in the . Ensure all four
Adjustment Arms have been fully rotated out and up before proceeding to the next
step. (Figure 1)
3. Place the , top side down, onto a .Stand Top Clean, Flat, and Stable Surface
4. Align the two on one of the with the two in the Pegs Legs Holes Stand Top.
(Figure 2)
5. Firmly press the two on one of the into the two in the Pegs Legs Holes Stand Top.
6. Repeat steps 4-5 to install the second .Leg
7. Flip the upright and position it on a Monitor Riser Assembly Clean, Flat, and
Stable Surface for use.
8. Connect the to the and to an available . Power Adapter Power Cable Power Source
1
2
4
3
Figure 1
Figure 2
Pegs
Problemløsning StarTech.com MONSTADQI
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 600 mm |
| Dybde: | 83 mm |
| Højde: | 250 mm |
| Vægt: | 1900 g |
| Produktfarve: | Sort |
| Pakkevægt: | 2100 g |
| Pakkedybde: | 352 mm |
| Pakkebredde: | 703 mm |
| Pakkehøjde: | 75 mm |
| Husmateriale: | MDF, Plastic |
| Certificering: | CE, FCC, RoHS |
| AC-adapter inkluderet: | Ja |
| Monteringstype: | Skrivebord |
| Indgangsspænding: | 100 - 240 V |
| Hovedkassen højde (udvendigt): | 723 mm |
| Hovedkassens længde (udvendigt): | 245 mm |
| Hovedkassens bredde (udvendigt): | 724 mm |
| Højdejustering: | Ja |
| Produkter pr. hovedkasse (udvendigt): | 6 stk |
| Maksimal vægtkapacitet: | 15 kg |
| Højdejusteringsområde: | 83.5 - 115.5 mm |
| Forbedret kabelstyring: | Ja |
| Maksimal skærmstørrelse kompatibilitet: | - " |
| Antal understøttede skærme: | 1 |
| Minimal skærmstørrelse kompatibilitet: | - " |
| Montering interface kompatibilitet (min.): | - mm |
| Montering interface kompatibilitet (maks.): | - mm |
| Indbygget trådløs oplader: | Ja |