Speco Technologies
Højttaler
SPG6MT
Speco Technologies SPG6MT Brugsanvisning
Her er Speco Technologies SPG6MT (Højttaler) brugervejledning. 1 sider på sprog med en vægt på 858,679.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/1
1. Your SPG6MT speaker will have a plasc wire
terminal connected to it, as pictured in the inset
to the le. The top part will already be connected
to the speaker. To connect the speaker wiring to
the backcan, simply push the N tab and insert the
negave wire on the terminal and push the “L”
tab an connect the posive wire on the terminal.
2. Ensure the red dogleg clamps are open and slip
the speaker onto the backcan. Line up the clamps
with the cutouts on the top of the backcan.
3. Flip the speaker over (taking care it does not
separate), and using the included screws, secure
the speaker to the backcan using the 4 screw
holes next to the red dogleg clamps.
4. Using the press terminals on the boom of the
backcan, connect the red terminal to the posive
terminal on your 70V amplier, and the black
terminal to the negave/common terminal on
your 70V amplier.
2
3
SPG6MT and SPG6MTCAN Installaon Instrucons
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Speco Technologies .
200 New Highway .
Amityville . NY .
11701 .
www.specotech.com
REV. 08/24/22
1
Problemløsning Speco Technologies SPG6MT
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Speco Technologies |
| Kategori: | Højttaler |
| Model: | SPG6MT |