Speco Technologies
Overvågningskamera
HD1B316
Speco Technologies HD1B316 Brugsanvisning
Her er Speco Technologies HD1B316 (Overvågningskamera) brugervejledning. 2 sider på sprog med en vægt på 403,914.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
HD1B316
High Definition Weatherproof Bullet Camera
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
1. Package Contents
1 HD1B316 camera
4 Mounting Screws
1 Wrench
2. Features
4. OSD Menu
3. Controller
①
②
③
Main Menu
Lens ▷
Shutter ▷
BLC ON
AGC MID
White Balance ▷
Adjust ▷
Reset ▷
Return
* 1/3” Sony 720P HD CMOS Sensor (Megapixel Resolution)
* 3.5~16mm Auto Iris Lens
* HDcctv 720p30 Video Output (1.5Gb/S Digital over coax)
* Video Output for Test Monitor
* True Mechanical Day / Night (ICR)
* Min. Illumination – Color : 0.2Lux, F1.2 / B/W : 0.01Lux, F.1.2
* External Controls for Zoom and Focus
* Easy mount system simplifies installation
* Weatherproof Operation (IP-67 Rated)
* Indoor / Outdoor : meets all your surveillance needs
* Install using RG 59cable & BNC connectors
* 5 year warranty
* Lens
-DC : DC Lens Type Setting
IRIS ADJ [ Value] : IRIS Open Level Control
- Return : Function Back
*Shutter
-Flicker : This function triggers the screen in the 50Hz power range, preventing the
screen flicker that can result from the dissonance of vertical
synchronization frequency and blink frequency.
- Auto : Only Operate when Manuals Lens is active
- Manual : 1/30, 1/60, 1/600, 1/1200, 1/6000, 1/12000
- Return : Function Back
* BLC
- Provides light level control to overcome severe back light condition
* AGC
- OFF / LOW / MID / HIGH
* White Balance
- AWB : Auto White Balance Mode Setting
- Fixed[Value] : 2300,3100,5000,6800
- Manual : White Balance Mode Manual Setting
R-Gain [Value] : R-Gain Value Control
B-Gain [Value] : B-Gain Value Control
-Return : Function Back
* Adjust
- Sharpness [Value] : Sharpness Control
- Brightness : Adjust a brightness setting of monitoring status
- Contrast : Adjust a contrast of monitoring status
- Day / Night : [Auto]
[Color]
[B/W]
- Return : Function Back
* Reset
- Would you like to reset? Yes or No
4. OSD Menu Details
① Switch for Selection of Video out / SDI out
② Video output for Test Monitor
③ OSD Button (UP/DOWN/LEFT/RIGHT/SET)
Problemløsning Speco Technologies HD1B316
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Kode for international beskyttelse (IP): | IP67 |
| Type: | CCTV sikkerhedskamera |
| Bredde: | 91 mm |
| Dybde: | 264 mm |
| Højde: | 84 mm |
| Vægt: | 485 g |
| Brugervejledning: | Ja |
| Produktfarve: | Sort |
| Formfaktor: | Kugle |
| Understøttede videotilstande: | 720p |
| Ethernet LAN: | Ingen |
| Maksimal opløsning: | 1084 x 1076 pixel |
| Forbindelsesteknologi: | Ledningsført |
| DC-in-stik: | Ja |
| Monteringstype: | Væg |
| Understøttet placering: | Indendørs & udendørs |
| Hvidbalance: | Automatisk |
| Sensortype: | CMOS |
| Samlet antal megapixels: | 1.5 MP |
| Optisk zoom: | - x |
| Strømforbrug: | 790 mA |
| Progressiv scanning: | Ja |
| Dag/nat funktion: | Ja |
| Minimumsbelysning: | 0.01 Lux |
| Optisk sensorstørrelse: | 1/3 " |
| Nattesyn: | Ja |
| Billedhastighed: | 30 fps |
| DC udgangsspænding: | +12V |
| Brændviddeområde: | 3.5 - 16 mm |
| Signal/støjforhold: | 50 dB |
| F-number (relativ aperture): | 1.2 |
| NTSC opløsninger: | 1084 x 1076 pixel |
| PAL opløsninger: | 1329 x 1049 pixel |