Pyle PLSMRW104BK Brugsanvisning
Her er Pyle PLSMRW104BK (Højttaler) brugervejledning. 4 sider på sprog Engelsk med en vægt på 0.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/4
Features:
• 10'' Slim Waterproof Subwoofer
• Completely Waterproof
• For Marine or Car Use
• PP Cone with Rubber Edge
• High-Powered Car Subwoofer
• Lab Tested Pro Audio Woofer Performance
• Massive Butyl Rubber Surround
• High Strength Engineering Plastic Basket
• Quick Connect Speaker Terminal
• Compatible with Sealed Enclosure Speaker Box Audio Setup
• Impressive Bass Response, Low-Resonance Frequency Output
• Designed for Custom Audio Car, Truck, Mobile Vehicle Applications
Installation Guide
Screw down each of the four Phillips
head screws. The locking tabs will
swivel into place and secure the unit
to the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Replace the metal grille.
10'' Slim Waterproof Subwoofer
400 Watts at 4-Ohm Car Audio Powered Subwoofer, PP Cone with Rubber Edge
PLSMRW104WT - PLSMRW104BK
www.PyleUSA.com
Cut the drywall.
Note: Always allow at least one-half
inch between a wall stud and the
speaker cutout or the locking tabs
will not be able to swivel into place.
Connect the speaker wires to the
speaker.
Problemløsning Pyle PLSMRW104BK
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Pyle |
| Kategori: | Højttaler |
| Model: | PLSMRW104BK |