Pyle PDWR69BTW Brugsanvisning
Her er Pyle PDWR69BTW (Højttaler) brugervejledning. 3 sider på sprog med en vægt på 0.4 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/3
www.PyleUSA.comwww.PyleUSA.com
Wall Mountable, 100 Watts MAX
with 2-Way Full Range Stereo
Sound Reproduction, Pair
PDWR69BTB - PDWR69BTW
6.5'' Pro Active Wireless BT
Streaming Speakers
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Note:
Anytime you note distortion, reduce the volume to a lower setting. Never
allow your amplier to be driven into " ". Otherwise the speakers clipping
may be damaged. Damage caused by operating the speakers at distorted
volume levels is not covered by the warranty.
WIRELESS BT PAIRING
Ensure the speaker is connected to the power supply and turned on.
Any BT device (such as phones, tablets, laptops etc.) is available for pairing.
Note:
• Please press the "MODE" button to choose the Bluetooth input.
• There will be a prompt sound when BT is connected/disconnected.
• BT Input has the priority when BT input and RCA input are connected
simultaneously. To listen to RCA input audio, disconnect from BT before
using a RCA input device.
• One device can only connects or control one BT speaker at a time.
If device A connects and controls BT, device B cannot search or control the
BT speaker. Device A MUST no longer be connected, then device 8 can
connect and control.
• If you want to use the TWS connection, make sure two speakers are
turned ON and in BT MODE, then hold the TWS button from anyone of the
speakers for 3 seconds,two active units will connected automatically.
• If pairing fails the rst time, restart all the equipment and then follow the
above instructions.
• If you are unable to reconnect a previously connected device, remove the
" " from the list of paired devices, and then follow the above PyleUSA
instructions again.
• The BT connection will be lost if the distance between the speaker and the
BT device exceeds 1Om (32.8 ft.).
PyleUSAPyleUSA
1. Open the setting
menu and select BT.
2. Turn on BT and
search devices.
3. Click "PyleUSA"to
pair with your device.
CARE AND MAINTENANCE
• Turn off the power to the speaker when unused for long periods of time.
• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet
need only occasional dusting/cleaning. Never use chemicals or solvents as
they may damage the surface. Always clean using a dry cloth.
• Never touch the speaker drivers.
Technical Specs:
• Power Supply: 100W (MAX Power)
• RMS Power: 50W (Passive Speaker)
• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter
• Subwoofer Type: 6.5'' Paper Cone
• Tweeter Type: 0.5'' Mylar Dome
• Frequency Response: 70-20 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86dB
• Construction Material: Polypropylene
• Power Cable Length: 3.94 ft.
• Power Output: 100-240V
• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches
Problemløsning Pyle PDWR69BTW
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Pyle |
| Kategori: | Højttaler |
| Model: | PDWR69BTW |