Pyle PDMR5 Brugsanvisning
Her er Pyle PDMR5 (Subwoofer) brugervejledning. 2 sider på sprog Engelsk med en vægt på 0.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
www.PyleUSA.com
Specications:
• Power Handling:
• RMS Power: 100 Watts
• Peak Power: 200 Watts
• Cone Material: 5'' Paper Coating Cone
• Voice Coil: 1'' High-Temperature Aluminum Voice Coil
• Magnet Structure: 15 oz
• Sensitivity: 92 dB
• Frequency Response: 450 Hz – 7 kHz
• Impedance: 8 Ohms
• Mounting Depth: 2'' (inches)
• Minimum Cutout Diameter: 4.33'' (110 mm)
• Overall Diameter: 5.15'' (inches)
Installation Instructions
Preparing the Mounting Area: Ensure that the mounting surface is at and free from
debris. Conrm the cutout diameter is 4.33'' (110 mm) to t the woofer properly.
Mounting the Woofer: Align the woofer with the pre-cut hole.
Use screws to securely fasten the woofer into place.
Make sure the screws are tightened evenly to avoid stress on the frame.
Wiring: Connect the positive (+) and negative (-) terminals of the woofer to the
amplier, making sure that the impedance matches the system requirements (8 Ohms).
USER GUIDE
5'' Mid-Bass Mid-Range Woofer Driver
PDMR5
Visit Our Website
SCAN ME
PyleUSA.com
Register Product
Thank you for choosing PyleUSA. By registering your product, you
ensure that you receive the full benets of our exclusive warranty and
personalized customer support. Complete the form to access expert
support and to keep your PyleUSA purchase in perfect condition.
Start Here
Model Number:
PDMR5
PyleUSA.com/pages/register
Problemløsning Pyle PDMR5
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Pyle |
| Kategori: | Subwoofer |
| Model: | PDMR5 |