Pioneer Overvågningskamera ND-BC6

Pioneer ND-BC6 Brugsanvisning

Her er Pioneer ND-BC6 (Overvågningskamera) brugervejledning. 16 sider på sprog Engelsk med en vægt på 0.8 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.

Side 1/16

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U . . .S A

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique

TEL: . .(0) 3/570 05 11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

5 Arco Lane, Heatherton, Victoria, 3202 Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada

TEL: 1-877-283-5901

TEL: 905-479-4411

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd Manuel Avila Camacho 138 10 piso.

Col Lomas de Chapultepec, Mexico, D. .F. 11000

TEL: 55-9178-4270

Tous droits de reproduction et de traduction

réservés.

Printed in China

Imprimé en Chine

<231 0005150Y> EL<KYTNX> <12G00000> .

Owner’s Manual

Mode d’emploi

UNIVERSAL REAR-VIEW CAMERA

CAMERA DE RECUL UNIVERSELLE

ND-BC6

① Glass surface

② Make sure it doesn’t touch the wiper

③ Install on the center part

Fig. 1

Abb. 1

𝖠 Rear view camera Power supply unit × 1 𝖢× 1𝖡 RCA power supply cable × 1

𝖣 Hexagon wrench × 1 𝖤 Hook and loop fastener

(soft type) × 1

𝖥 Hook and loop fastener

(hard type) × 1

𝖧 Waterproof

pad × 1

𝖦 Clamp × 6 𝖨 Double-sided

tape × 1

Fig. 4

Abb. 4

Fig. 8

Abb. 8

Fig. 6

Abb. 6

Fig. 9

Abb. 9

② Bumper or rear edge of car

① Power supply unit

② Hook and loop

fastener

(hard type)

③ Hook and loop

fastener

(soft type)

① Camera

stand

Fig. 2

Abb. 2

Fig. 3

Abb. 3

This device complies with part 15 of the FCC

Rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

If you want to dispose this product, do not

mix it with general household waste. There

is a separate collection system for used elec-

tronic products in accordance with legisla-

tion that requires proper treatment, recovery

and recycling.

Private households in the member states of the EU,

in Switzerland and Norway may return their used

electronic products free of charge to designated col-

lection facilities or to a retailer (if you purchase a

similar new one). For countries not mentioned above,

please contact your local authorities for the correct

method of disposal. By doing so you will ensure that

your disposed product undergoes the necessary treat-

ment, recovery and recycling and thus prevent poten-

tial negative effects on the environment and human

health.

WARNING:

Handling the cord on this product or cords associated

with accessories sold with the product may expose

you to chemicals listed on proposition 65 known to

the State of California and other governmental enti-

ties to cause cancer and birth defect or other repro-

ductive harm. Wash hands after handling.

IMPORTANT

SAFEGUARDS

• Installation and wiring of this product require spe-

cialist skill and experience. To assure your safety,

please request a specialist technician to install the

unit.

• Do not attempt to heat the surface of the camera

lens or camera lens itself with a lighter and so on

when they have become frozen. This can cause a

malfunction.

• This product is a rear view camera for checking

the view at the rear of a car.

A rear view camera is a camera that provides sym-

metrical images in the same way as rear and side

view mirrors.

• Connection to a TV with an RCA video input is

possible, but confirm whether the TV you use has

a reverse gear connection function.

• This product is designed to supplement the driver’s

rear view, but the camera images do not show all

dangers and obstacles. Be sure to look behind you

when reversing to confirm the view.

• This product features a wide-angle lens, so the

near view is wide and the far view is narrow,

which may create a false sense of distance. Be

sure to look behind you when reversing to confirm

the view.

• Do not wash your car with an automatic car wash

or high-pressure water as it may result in water

entering the camera or the camera falling off.

• Check camera stand installation before driving.

– Are the screws loose?

– Is the camera stand firmly secured?

– If the rear view camera comes loose while you

are driving it may cause an accident.

• This product by itself does not display guidelines.

⑥ Be sure not to hide any part of the char-

acters on the license plate when attaching

the camera.

Fig.5

Abb. 5

00-00

Fig. 7

Abb. 7

② Top

③ Mark

④ Bottom

⑤ Make sure to install the rear view camera so

that the mark is located on top of the camera.

① Hexagon wrench

Problemløsning Pioneer ND-BC6

Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp

Specifikationer

Produktfarve:	Sort
Wi-Fi:	Ingen
Formfaktor:	Kasse
Format til analogt signal:	NTSC
Ethernet LAN:	Ingen
Maksimal opløsning:	- pixel
Forbindelsesteknologi:	Ledningsført
Indbygget HDD:	Ingen
Sensortype:	CMOS
Optisk zoom:	- x
Strøm over Ethernet (PoE):	Ingen
Minimumsbelysning:	0 Lux
Optisk sensorstørrelse:	1/4 "
Nattesyn:	Ingen
PTZ-kontrol:	Ingen