Pelco
Ikke kategoriseret
FMCI-AF1MM1ST
Pelco FMCI-AF1MM1ST Brugsanvisning
Her er Pelco FMCI-AF1MM1ST (Ikke kategoriseret) brugervejledning. 8 sider på sprog med en vægt på 832,663.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/8
C3923M-A / REV 07-28-14
TECH SUPPORT: (800) 289-9100 INTERNATIONAL: +1 (559) 292-1981
INSTALLATION AND OPERATION MANUAL
FMCI-AF1/BF1 Series
10/100MBPS ELECTRICAL TO OPTICAL
ETHERNET MEDIA CONVERTERS
The FMCI-AF1/BF1 media converters convert 10/100Mbps Fast Ethernet from
an electrical signal to an optical signal and back to an electrical signal. The
electrical connection uses an RJ45 data connector.
Depending on the specific model in use, the optical connector is either a ST or
SC, 1 or 2 Fibers, multimode (MM) or singlemode (SM), and the unit operates
on either AC/DC or DC only power.
The standard size units may be directly plugged into the Rack (Pelco Part
US-RACK or EU-RACK) or operated as a standalone module. The small size
units operate as standalone modules only.
See Figures 1 – 6 for complete installation details.
This manual serves the
following Model Numbers:
FMCI-AF1MM1STM
FMCI-BF1MM1STM
FMCI-AF1SM1STM
FMCI-BF1SM1STM
FMCI-AF1MM1ST
FMCI-BF1MM1ST
FMCI-AF1SM1ST
FMCI-BF1SM1ST
Problemløsning Pelco FMCI-AF1MM1ST
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Pelco |
| Kategori: | Ikke kategoriseret |
| Model: | FMCI-AF1MM1ST |