Mikrotik GPEN11 Brugsanvisning
Her er Mikrotik GPEN11 (Skifte) brugervejledning. 5 sider på sprog med en vægt på 745,068.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/5
GPEN11
This device allows powering a PoE capable device over the Ethernet,
using the same voltage, as provided with the DC input jack.
Powering
The device accepts power from direct-input power jack (5.5 mm
outside and 2 mm inside, female, pin positive plug) 12-57 V DC⎓.
Power output
The device supports PoE out from Ethernet port located under the
cover. You can power Mikrotik devices which supports passive powering
through Ethernet.
Mounting
Step 1:
1. Remove the cover screw using PH2 screwdriver;
2. Remove cover to access mounting points.
Step 2:
1. Drill holes using drill bid;
2. Insert dovels if needed;
3. Attach the unit to the wall, using wall and secure with screws.
Step 1. Step 2.
See mikrotik.com/products for the latest version of this document. Page 1, Document #46507 Modified on: 29.OCT.2019
Problemløsning Mikrotik GPEN11
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Produktfarve: | Hvid |
| Ethernet LAN-porte (RJ-45): | 2 |
| Driftstemperatur (T-T): | -40 - 70 °C |
| Ethernet LAN-datahastigheder: | 10,100,1000 Mbit/s |
| Dimensioner (BxDxH): | 92 x 104 x 24 mm |
| DC-in-stik: | Ja |
| Indgangsspænding: | 10 - 57 V |
| Strøm over Ethernet (PoE): | Ja |
| Ethernet-grænsefladetype: | Gigabit Ethernet |
| Antal produkter inkluderet: | 1 stk |
| Power over Ethernet (PoE) spænding: | - V |