Metra
Bilmonteringssæt
99-6532B
Metra 99-6532B Brugsanvisning
Her er Metra 99-6532B (Bilmonteringssæt) brugervejledning. 8 sider på sprog med en vægt på 1,229,828.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/8
METRA. The World’s best kits.
™
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 9/23/2015 INST99-6532B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-6532B
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) White panel clips • E) (4) #8 x 3/8” Phillips screws
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV
Antenna Adapter: • 40-EU55 Amplified antenna adapter
• Panel removal tool • Phillips screwdriver
• Torx driver
TOOLS REQUIRED
Jeep Renegade 2015-up
99-6532B
A
EDC
B
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
Table of Contents
• ISO DIN radio provision with pocket
• Painted to match factory finish
KIT FEATURES
Problemløsning Metra 99-6532B
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Metra |
| Kategori: | Bilmonteringssæt |
| Model: | 99-6532B |