Megger BM122 Brugsanvisning
Her er Megger BM122 (Måling) brugervejledning. 8 sider på sprog Engelsk med en vægt på 633,710.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/8
SAFETY WARNINGS
✱ Safety Warnings and Precautions must be read
and understood before the instrument is used.
They
must be observed during use.
✱ The circuit under test must be switched off, de-
energised and isolated
before Insulation or
Continuity tests are made.
✱ The test push button must not be held down while
connecting the test leads.
✱ During an insulation test, the circuit must not be
touched.
✱ After insulation tests, capacitive circuits must be
allowed to discharge
before disconnecting the test
leads.
✱ Test leads, prod and crocodile clip must be in
good order; clean, and with no broken or cracked
insulation.
✱ Replacement fuses must be of the correct size,
type and rating.
M BM121 and BM122
Insulation & Continuity Testers
User Guide
Guide de l’utilisateur
Gebrauchsanleitung
Guía del usuario
Symbols used on the instrument
Caution: Risk of electric shock
Caution: refer to acompanying notes.
Equipment protected throughout by Double Insulation (Class II).
Equipment complies with current EU Directives
NOTE
THE INSTRUMENTS MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT
PERSONS
.
Problemløsning Megger BM122
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Megger |
| Kategori: | Måling |
| Model: | BM122 |