Hikvision Ikke kategoriseret ISD-SC6040S-H4CVL

Hikvision ISD-SC6040S-H4CVL Brugsanvisning

Her er Hikvision ISD-SC6040S-H4CVL (Ikke kategoriseret) brugervejledning. 19 sider på sprog med en vægt på 3,495,945.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.

Side 1/19

Security Inspection System

Quick Start Guide

E N G L I S H

PRODUCT INFORMATION

CHECK BEFORE START

START-UP

ACTIVATE DEVICE

The Manual includes instructions for using and managing the Product. Pictures, charts,images and all other information hereinafterare for description and explanation only.The information contained in the Manualis

subject to change, without notice, dueto firmware updates or other reasons.Please find the latest version ofthis Manual at the Hikvision website(https://www.hikvision.com/).

Please use this Manual with theguidance and assistance of professionals trainedin supporting the Product.

and other Hikvision's trademarks and logosare the properties of Hikvision invarious jurisdictions. Other trademarks and logosmentioned are the properties of theirrespective owners. Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, THIS MANUAL AND THEPRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWAREAND FIRMWARE, ARE PROVIDED “AS IS”AND “WITH ALL FAULTS AND

ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESSOR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,SATISFACTORY QUALITY, OR FITNESS FOR APARTICULAR PURPOSE. THE USE OF THEPRODUCT

BY YOU IS AT YOUR OWNRISK. IN NO EVENT WILL HIKVISIONBE LIABLE TO YOU FOR ANYSPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,INCLUDING, AMONG OTHERS, DAMAGES FOR LOSSOF BUSINESS

PROFITS, BUSINESS INTERRUPTION, OR LOSS OFDATA, CORRUPTION OF SYSTEMS, OR LOSSOF DOCUMENTATION, WHETHER BASED ON BREACHOF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCTLIABILITY, OR

OTHERWISE, IN CONNECTION WITH THE USEOF THE PRODUCT, EVEN IF HIKVISIONHAS BEEN ADVISED OF THE POSSIBILITYOF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OFTHE INTERNET PROVIDES FOR INHERENT SECURITYRISKS, AND HIKVISION SHALL NOT TAKEANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACYLEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITYRISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELYTECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCTIN COMPLIANCE WITH ALL APPLICABLE LAWS,AND YOU ARE SOLELY RESPONSIBLE FORENSURING THAT YOUR USE CONFORMS TOTHE APPLICABLE LAW. ESPECIALLY, YOU ARE

RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES,INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOUSHALL NOT USE THIS PRODUCT FORANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENTOR PRODUCTION OF WEAPONS OF MASSDESTRUCTION, THE

DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THECONTEXT RELATED TO ANY NUCLEAR EXPLOSIVEOR UNSAFE NUCLEAR FUEL-CYCLE, OR INSUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTSBETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS

Directive 2011/65/EU, the LVD Directive 2014/35/EU and the MD Directive 2006/42/EC.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsortedmunicipal waste in the European Union. For proper recycling, return this product to yourlocal supplier upon the

purchase of equivalent new equipment, ordispose of it at designated collectionpoints. For more information see: www.recyclethis.info

Regulation (EU) 2023/1542(Battery Regulation): This product contains a battery and it is in conformity with the Regulation (EU) 2023/1542. The battery cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), or lead (Pb). For proper recycling,

return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

INSTALLATION CAUTION

Never place the equipment in an unstable location. The equipment may fall,causing serious personal injury or death.

1. Plug the power cable to the power socket.

2. Insert the key into the key switch (ON/OFF) of the keyboard and rotate it 90° clockwise to power on

the control system. Press the startup button (START), and you will hear the sound of the relay closing.

Wait for startup.

-Before you press the startup button, make sure the emergency stop button at the device entrance

and exit or on the control panel is not pressed. If pressed, the X-ray generator and the conveyor

cannot be activated. Rotate the emergency stop button 30° clockwise to reset.

-The power indicator lights up, indicating that the system is started.

-If there are faults occurred on conveyor or X-ray generator while starting up, press the emergency

stop button to power off those parts.

1. Activate the device for the first use.

- Only the Admin user can activate the device.

2.Enter and confirm the password and complete the activation.

- The password should not be less than 8 characters including numeric and letters.

1. Make sure the power cable is well connected.

Make sure the device is well grounded. Make sure the emergency stop button on the cover plate is not pressed. If it is pressed, rotate the button clockwise to reset.

Make sure the emergency stop button on the control panel is not pressed. If it is pressed, rotate the button clockwise to reset. Make sure the keyboard works properly.

-If the cable cover is damaged, the emergency stop button is invalid or the keys on the keyboard are jammed, please stop using and contact the after-sales.

2. Make sure the lead curtain which is used to prevent X-ray leakage at the tunnel entrance and exit is intact: There should be no obvious gaps and damages between

the curtains.

-If the lead curtain gap is too large or the lead curtain is seriously damaged, please stop using and contact the after-sales.

3. Make sure there is no crack on the surface of the conveyor belt, and there should be a certain distance between the edge of the conveyor belt and the protective

shields on both sides. Make sure the conveyor belt is not deviated or stuck.

-If the conveyor belt deviates from the center of the tunnel (the belt is stuck the gap between the conveyor and the protective shields) or the tension is insufficient (the