GE Profile JP961SHSS Brugsanvisning
Her er GE Profile JP961SHSS (Komfur) brugervejledning. 8 sider på sprog Engelsk med en vægt på 0.4 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/8
36" Electric Cooktop
Installation
Instructions JP960, JP961, JP968, JP969, ZEU769
CAUTION: Before you begin—read these
instructions completely and carefully.
• IMPORTANT—Save these instructions for
local inspector’s use.
• IMPORTANT—OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
• Note to Installer—Be sure to leave these
instructions with the Consumer.
• Note to Consumer—Keep these instructions
for future reference.
• Note—This appliance must be properly
grounded.
Parts Included
1/8" Drill Bit &
Electric or
Hand Drill
Phillips
Head
Screwdriver
Pencil Ruler or
Straightedge
Wire Nuts
Saber Saw
2 Foam Strips
4 Screws
Tools You Will Need
1
2 Hold
Down
Brackets
Junction
Box
“If you have questions, call 800.GE.CARES or visit our website at:
www.GEAppliances.com”
Materials Needed
229C4053P530
31-10546 (09-02 JR)
• ATTENTION INSTALLER: ALL COOKTOPS
MUST BE HARD WIRED (DIRECT WIRED)
INTO AN APPROVED JUNCTION BOX.
A “PLUG AND RECEPTACLE” IS NOT
PERMITTED ON THESE PRODUCTS.
Problemløsning GE Profile JP961SHSS
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | GE |
| Kategori: | Komfur |
| Model: | Profile JP961SHSS |