Fluke
Ikke kategoriseret
i800 AC
Fluke i800 AC Brugsanvisning
Her er Fluke i800 AC (Ikke kategoriseret) brugervejledning. 6 sider på sprog Engelsk med en vægt på 0.5 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/6
PN 2842289
June 2007 Rev.1, 8/08
©2007-2008 Fluke Corporation. All rights reserved. Product
specifications are subject to change without notice. Printed in
France.
®
i800
AC Current Clamp
Instruction Sheet
Introduction
The i800 AC Current Clamp, the Clamp, has been designed for use
with multimeters, recorders, power analyzers, safety testers, etc., for
accurate non-intrusive ac current measurement.
Using the latest transformer technology, the Clamp measures
currents from 100 mA to 800 A.
The Clamp complies with the safety standards EN61010-2-032 for
input and output circuits.
Symbols
The table below lists the symbols used on the Clamp and/or in this
manual.
Symbol Description
~ Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
W Important Information. See manual.
X Hazardous Voltage. Risk of electric shock.
T Double insulation.
, Application around and removal from HAZARDOUS LIVE
conductors is permissible.
) Conforms to Canadian Standards Association.
P Complies with the relevant European standards.
; Conforms to Australian standards.
CAT III
Equipment designed to protect against transients in
equipment in fixed-equipment installations, such as
distribution panels, feeders and short branch circuits, and
lighting systems in large buildings.
Problemløsning Fluke i800 AC
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Fluke |
| Kategori: | Ikke kategoriseret |
| Model: | i800 AC |