Emerson
Luftfugter
SRT-12
Emerson SRT-12 Brugsanvisning
Her er Emerson SRT-12 (Luftfugter) brugervejledning. 2 sider på sprog med en vægt på 309,863.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
GEIST™ TEMPERATURE SENSOR
Quick Installation Guide
VM1230/590-2250-501A 1
Part Number:
SRT 1.25/4/10
Description
The SRT sensor probe is used to
monitor temperature in critical
environments.
NOTE: The SRT sensor and cable
assembly can span a total cable
distance up to 600 ft from the
Geist environmental monitoring
device.
NOTE: Three sensor sizes are
available. The standard
temperature probe measures 1.25
inches (3.18 cm) in length. The
4-inch (10.16 cm) and 10-inch (25.4
cm) probe options are available for
customers wanting to submerge
these probes in water or glycol for
liquid temperature monitoring.
Installation
1. Mount the temperature sensor
anywhere in the data center
with zip ties or Velcro tape.
2. Plug the uplink cable into the
sensor port (RJ12/ ) of the
Geist environmental monitoring
device or rack PDU.
Once connected, the Geist
environmental monitoring device
automatically detects and identifies
the sensor.
1.25 inches
4 inches
10 inches
Typical Error Curve
Geist
TM
Temperature Sensors
Problemløsning Emerson SRT-12
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Type: | Fritstående |
| Forbindelsesteknologi: | Ledningsført |
| Kabellængde: | 3.6 m |
| Harmoniseret systemkode (HS): | 90318080 |
| Sensortype: | Temperatursensor |
| Standard grænseflader: | RJ-12 |
| Nøjagtighed: | 0.5 °C |
| Temperatur måleinterval: | -55 - 125 °C |