Chief SSC4 Brugsanvisning
Her er Chief SSC4 (Sikkerhed adgangskontrolsystem) brugervejledning. 2 sider på sprog med en vægt på 428,985.0 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
CHIEF MANUFACTURING INC. 8802-000130
1-800-582-6480 952-894-6280 FAX 952-894-6918 2004 Chief Manufacturing
12800 HIGHWAY 13 SOUTH, SUITE 500 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 01/04
INSTALLATION INSTRUCTIONS
BRACKET
SSC-4
The SSC bracket is designed for adding additional security to installations. By installing the SSC, a locking
device can be placed to obscure access to fastening hardware.
Unpack and check contents (see Figure 1):
(2) SSC-3 (5/16” clearance hole) (1) M4 Flat Washer
(3) SSC-1 (#10 clearance hole) (1) M5 Flat Washer
(1) 10-24 x .25” Phillips Head Cap Screw (1) M6 Flat Washer
(1) 5/16-18 x .625” Button Head Cap Screw (1) 3/16” Hex Key
1. Remove one of the 10-24 screws from the projector’s SLB interface bracket (see Figure 2).
2. Replace the 5/16” set screw of the RPA projector mount with the supplied 5/16” Button Head Cap
Screw and an SSC-3 (see Figure 3).
3. Install an SSC-1 bracket in one pitch and one roll adjustment screw on the RPA projector mount (see
Figure 4 & Figure 5).
Figure 2.
Figure 3.
Figure 1.
Problemløsning Chief SSC4
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Chief |
| Kategori: | Sikkerhed adgangskontrolsystem |
| Model: | SSC4 |