Behringer
Hi-Fi system
Vintage Tube Overdrive VT911
Behringer Vintage Tube Overdrive VT911 Brugsanvisning
Her er Behringer Vintage Tube Overdrive VT911 (Hi-Fi system) brugervejledning. 2 sider på sprog Dansk med en vægt på 0.1 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
VINTAGE TUBE OVERDRIVE VT911
Classic Vacuum Tube Overdrive
Thank you for showing your condence in us by purchasing the BEHRINGER VINTAGE TUBE OVERDRIVE VT911.
This high-quality classic tube overdrive pedal is based on a hand-selected BUGERA 12AX7B vacuum tube.
Get a whole tube amp in a pedal and take o with anything from warm blues overdrive to heavy distortion.
1. Controls
(1) Use the 9 V𝌂 connection to plug in a 9 V power supply.
(2) The ¼" TS connector sends the signal to your amp.OUT
(3) Use this ¼" TS connector to plug in the instrument cable.IN
(4) The control adjusts the output level.LEVEL
(5) The control allows you to adjust the overall sound.TONE
(6) The control adjusts the amount of distortion. Extreme DRIVE settings result in a more DRIVE
compressed sound with less dynamics.
(7) Use the footswitch to activate/deactivate the eect. The status LED beneath the LEVEL control
illuminates when the eect is activated.
(8) The BUGERA 12AX7B vacuum tube is placed here.
The is located at the underside.SERIAL NUMBER
(4)
(3) (2)
(6)
(7)
(8)
(1)
(5)
Problemløsning Behringer Vintage Tube Overdrive VT911
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Behringer |
| Kategori: | Hi-Fi system |
| Model: | Vintage Tube Overdrive VT911 |