American DJ
Effektmaskine
Snap Shot LED II
American DJ Snap Shot LED II Brugsanvisning
Her er American DJ Snap Shot LED II (Effektmaskine) brugervejledning. 2 sider på sprog Engelsk med en vægt på 0.4 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Snap Shot LED II SPECIFICATIONS:
LED: 220 LEDs
Working Position: Any safe working position
Power: 120V/60Hz
Power Draw: 15W
Weight: 4lbs./ 2Kgs.
Dimensions: 12.25”(L) x 10”(W) x 9”(H)
310 x 250 x 230mm
Warranty: 2 Year (730 days)
Unpacking: Thank you for purchasing the Snap Shot LED II by ADJ Products, LLC. Every Snap Shot
LED II has been thoroughly tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be sure all accessories necessary
to operate the unit has arrived intact. In the case damage has been found or parts are missing, please
contact our toll free customer support number for further instructions. Do not return this unit to your
dealer without rst contacting customer support.
Introduction: The Snap Shot LED II is part of ADJ’s continuing pursuit for creating high quality afford-
able fixtures. The Snap Shot LED II is a simple, small LED strobe. This strobe is light weight and
compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The flash
speed can be adjusted using the knob on the rear of the unit. There are also IN/OUT mono plugs
located at the rear. These plugs are used to connect to other Snap Shot LED II’s.
Snap Shot LED II
Problemløsning American DJ Snap Shot LED II
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | American DJ |
| Kategori: | Effektmaskine |
| Model: | Snap Shot LED II |