Acer
LCD-skærmen
K242HLD
Acer K242HLD Brugsanvisning
Her er Acer K242HLD (LCD-skærmen) brugervejledning. 3 sider på sprog Engelsk med en vægt på 0.1 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/3
English
Attaching th
Attaching th
Attaching th
Attaching thAttaching the monitor
e monitor
e monitor
e monitor e monitor to the base
to the base
to the base
to the base to the base
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Package contents
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
back of the monitor.
into a nearby electrical outlet.
Attaching th
Attaching th
Attaching th
Attaching thAttaching the monitor
e monitor
e monitor
e monitor e monitor to the base
to the base
to the base
to the base to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of
the base. A clicking sound signifies that the monitor has been securely attached to the base.
Attaching th
Attaching th
Attaching th
Attaching thAttaching the monitor
e monitor
e monitor
e monitor e monitor to the base
to the base
to the base
to the base to the base
LCD
monitor Power cord VGA cable
(optional)
DVI cable Quick start
(optional) guide
3. Insert the monitor power cable into the power port at the
4. Plug the power cords of your computer and your monitor
HDMI Cable
(Op ion l)t a
2. Connect the signal cable to the VGA and/or DVI-D/HDMI
output
the computer. Then tighten
the signal cable connector.
input socket of the monitor, and the
VGA and/or DVI-D/
(optional)
socket of
the graphics card on the
thumbscrews on
HDMI
(optional)
2
Problemløsning Acer K242HLD
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Acer |
| Kategori: | LCD-skærmen |
| Model: | K242HLD |